Corrugated Testing

back

Our Corrugated Testing Machines represents the latest dimension in testing verification. With a vast array of products to perform numerous tests, one will be given the ability to increase the efficiency and durability of their testing material. Our Corrugated testing equipment provides the ability to test the various thicknesses of corrugated board samples along with crush, puncture, burst and permeability characteristics. We can meet the needs of global markets that have a wide range of products, facilities and budget constraints.

PRODUCTS

Burst Strength Tester BT-10 model

For Determining the Bursting Strength Value of Paper and Corrugated Board “Mullen type”

 

Applicable standards: ISO 2758 / 2759 - SCAN P25/P24 - TAPPI T403 / T807 / 810 - PAPTAC D19P/D8 - BS 3137 - DIN 53141 - AP/AS 1301,403 - ASTM D774

Standard Features

 

  • 15” laptop PC interface - for Data Acquisition and Control
  • LYNX Burst Test Programme
  • Direct Reading in kPa – Kg/cm2 – Bar & PSI
  • Paper: from 0 to 1500 kPa
  • Board: from 200 to 5,000 kPa
  • Statistics: Min/Max, Average and Standard Deviation
  • Operating security system
  • Pneumatic Clamping System
  • Acrylic protection screen (tests area)
  • Improve Your Quality System to ISO 9000
  • Pumping speed: 170 ml / min. (corrugated board) and 95 +/- 5 ml / min. (paper)

Short Span Compression Tester "SCT" SCM-1 model

Laboratory instrument for measuring the compressive strength in short SCT samples of paper and paperboard.

Applicable standards: ISO 9895 - TAPPI T826 - DIN 54518 - SCAN P46 - UNE 57142 - BS 7325 - AS/NZ 1301.4SO RP…

Standard Features

 

  • Touch Screen Screen Display
  • Load cell range: 0 - 300 N
  • Touch Screen Display with resolution: 0.02 N
  • Selectable Units: lbs/in or kN/m
  • Free span: 0,7 mm ± 0,05 mm
  • Testing speed: 3 ± 1 mm/min.
  • Built-in RS232 data output
  • Clamping force: 2300 ± 500 N
  • Compatible with LYNX Integral Test Managements System

Samples Crush Tester CDM-5 model

The Crush Tester is used to measure the compressive strength of samples Paper (Liner & Medium) Corrugated Board: CMT - RCT - CCT - ECT - FCT - PAT.

Designed to meet standards: ISO 7263 -13805 - 3035 - 13192 TAPPI T808 - T809 - T811 - T818 - T821 - T 822 - T823 - T824 - T 825 - T839 - EN 23035 - FEFCO.

Standard Features

 

  • 15” laptop PC interface - for Data Acquisition and Control
  • LYNX Crush Test Program (CMT - CCT - RCT - ECT - FCT - PAT)
  • Platen size: 150 X 150 mm
  • Maximum platen separation: 140 mm
  • Test speed: 3 to 125 mm/min.
  • Reading Resolution: 0.005 N (5000 N /100.000 points)
  • Force range: 10 to 5000 N  (resolution 0,01% = 0,5N)
  • Selectable units in N, Kg or lb
  • Statistics: Min/Max, Average and Standard Deviation
  • USB interface
  • Automatic return to the initial test position of the moving plate
  • Overload  protection

Laboratory Medium Fluter "Concora" type FT-07 model

This apparatus flutes the paper samples by means of two fluting rolls. Afterwards, the samples are tested in the crush tester for evaluation of the C.M.T. (Corrugating Medium Test) and C.C.T. (Corrugated Crush Test).

 

According to Standards: UNE 57.074 - ISO 7263 - TAPPI T 809 – DIN 53 143 – SCAN P27 – PAPTAC D29...

Standard Features

 

  • Adjustable pressure range 0-210 N
  • Standard equipment prepared for “A” Flute
  • High stability of temperature with PID controller
  • Precise controlled temperature
  • Programmable temperature with digital display: 177 ºC  ± 2 ºC

Puncture Tester PM01-ED model

For measuring the energy absorption or resistance to puncture compact and corrugated boards, specially the ones used when manufacturing packaging.

 

According to standards: UNE ISO 3036 - SCAN P23 - DIN 53142 - TAPPI T-803 - FEFCO 5…

Standard Features

 

  • Strong frame in steel, designed to avoid any vibrations during test
  • Pendulum arm with a circular angle of 90º
  • Striking head in the shape of a triangular pyramid
  • Disengaging mechanism, with security system
  • Security cover screen
  • Self-tightening grips with adjustable closing pressure to clamp the sample
  • 4 reading scales of units in Joules
  • Compatible with Quality Integral Management LYNX Plus & Pro

Digital Micrometer M5-P3 model (0.001 mm)

For fast and accurate determination of PAPER and CARDBOARD thickness. (Manual Operation)

 

According to Standards: BS DIN EN ISO UNE 534 - PAPTAC D4 - SCAN P7 - TAPPI T 411* (Optional)

Standard Features

 

  • Range: 0 - 10 mm
  • Resolution:  0.001 mm (1 micron)
  • Lowering speed: 2 ± 0.1 mm / s
  • Contact area:  2 cm2
  • Contact pressure: 100 +/- 10 kPa (1 kg/cm2) or 0,5 kg/cm2 (TAPPI)
  • Digital display with reset to “0” function
  • Manual drive by ergonomic handle
  • Compatible with LYNX Test Integral Management System

COBB Sizing Tester CT-05 model

For determining the water absorbance of Paper and Corrugated Board.

 

According to standards: TAPPI T441-ISO 535-NF Q-03-018- NF Q-03-035 -FEFCO 7- DIN 53132- EN 20535 - SCAN P12..

Standard Features

 

  • Standard Test Area - 100 cm2
  • Quick clamping of the sample (by spring)
  • Stainless steel hand roll – 10 Kg
  • Soft rubber gasket
  • All in stainless steel

Opening Force Tester "Openpack" OP-50 model

To determine quickly and accurately the necessary force to unfold and open to the boxes and cardboard cases.

 

As the packaging industry use every time high speed automation productive processes, it is necessary to know the tolerance of the used materials (corrugated and compact/cardboards - fine cardboards..).

Standard Features

 

  • Portable laptop PC interface for Data Acquisition and Control
  • Universal LYNX Test Programme - included
  • USB interface f/connection to a PC
  • Robust and highly accurate
  • Load Cell of 50 N capacity of force
  • Improve Your Quality System to ISO 9000
  • Quick return to initial start position
  • With additional grips it is possible to make tests of :
  • Separation glued lines – Bending – Static &
  • Dynamic Friction Coefficients – Tension / Compression …
  • Statistics: Min, Max, Average, Standard Deviation, Gauss Bells, Tolerances and Bars

Score Bending Quality Tester SQT-10 model

This equipment enables to evaluate quality relating score lines in corrugated board boxes quickly and precisely according to standard TAPPI T 829.

 

Packaging and packing industry use mechanized production processes, so it is essential to know how the used materials (corrugated-compact board, thin cardboard…) will act in the process.

Standard Features

 

  • 15” laptop PC interface for Data Acquisition and Control
  • LYNX testing software and friction test module
  • Dynamic and Static friction coefficient automatic determination
  • USB interface f/connection to a PC
  • Fitted with 50 N Load Cell
  • Reading resolution: 0.02 mm
  • Automatic return to initial test position
  • Speed selection for tests between 1 and 400 mm / min
  • Calculation of medium values and standard deflection
  • Unit selection in Kg - N or Lb

4-Point Bending Stiffness Tester 4PF-50 model

To determine quickly and accurately the 4-Point Bending Stiffness on standardized samples of Corrugated Board according to the International Standard ISO 5628.

 

Standard Features

 

  • 15” laptop PC interface for Data Acquisition and Control
  • Universal LYNX Test Programme – included
  • Programmable test speed from 1 to 1000 mm / min
  • Maximum crosshead travel: 500 mm
  • 500 N Force Capacity
  • Reading resolution 1/100.000 full scale: 0.005N
  • Automatic return to initial test position
  • Reading resolution: 0.02 mm
  • Statistics: Average and standard deviation
  • Unit selection in Kg - N or Lb

Roughness Tester - Bendtsen type

For determining the Smoothness / Roughness of paper and board - Bendtsen method.

 

According to standards: ISO 5636 / 8791/2 – SCAN P21 – DIN 53108 / 53120 – BS 4421…...

Standard Features

 

  • New design of measuring head, more life-long
  • No necessary to use any manostate weights
  • 10 cm2 measuring data
  • Mini air compressor included
  • 3 rotameters tubes with ranges of 0 - 100 ml/min., 50 - 500 ml/min. and 300 - 3000 ml/min.

CONTACT

Dpro Scientific Sdn. Bhd.

B-08-03, Dataran 32,

No. 2 Jalan 19/1, 46300,

Petaling Jaya, Selangor,

Malaysia.

 

Dpro Scientific Pte. Ltd.

80, Genting Lane,

#09-10 Ruby Industrial Complex,

349565 Singapore.

 

Tel      +6(03) 7960 4710

Fax     +6(03) 7960 4711

H/P     +6(012) 2175277

Email  sales@dproscientific.com

DPRO SCIENTIFIC SDN BHD Copyright © 2015