Paper Testing

back

Our Paper Testing Machines represents the latest dimension in testing verification. With a vast array of products to perform numerous tests, one will be given the ability to increase the efficiency and durability of their testing material. These equipment allows to make measures and tests of bursting strength, determination of the Humidity, Basis Weight, Friction, Compression, Short Span Compression SCT, Perforation, Porosity, Smoothness..., in samples of different thicknesses.   We can meet the needs of global markets that have a wide range of products, facilities and budget constraints.

Short Span Compression Tester "SCT" SCM-1 model

Laboratory instrument for measuring the compressive strength in short SCT samples of paper and paperboard.

Applicable standards: ISO 9895 - TAPPI T826 - DIN 54518 - SCAN P46 - UNE 57142 - BS 7325 - AS/NZ 1301.4SO RP…

Standard Features

 

  • Touch Screen Screen Display
  • Load cell range: 0 - 300 N
  • Touch Screen Display with resolution: 0.02 N
  • Selectable Units: lbs/in or kN/m
  • Free span: 0,7 mm ± 0,05 mm
  • Testing speed: 3 ± 1 mm/min.
  • Built-in RS232 data output
  • Clamping force: 2300 ± 500 N
  • Compatible with LYNX Integral Test Managements System

Samples Crush Tester CDM-5 model

The Crush Tester is used to measure the compressive strength of samples Paper (Liner & Medium) Corrugated Board: CMT - RCT - CCT - ECT - FCT - PAT.

Designed to meet standards: ISO 7263 -13805 - 3035 - 13192 TAPPI T808 - T809 - T811 - T818 - T821 - T 822 - T823 - T824 - T 825 - T839 - EN 23035 - FEFCO.

Standard Features

 

  • 15” laptop PC interface - for Data Acquisition and Control
  • LYNX Crush Test Program (CMT - CCT - RCT - ECT - FCT - PAT)
  • Platen size: 150 X 150 mm
  • Maximum platen separation: 140 mm
  • Test speed: 3 to 125 mm/min.
  • Reading Resolution: 0.005 N (5000 N /100.000 points)
  • Force range: 10 to 5000 N  (resolution 0,01% = 0,5N)
  • Selectable units in N, Kg or lb
  • Statistics: Min/Max, Average and Standard Deviation
  • USB interface
  • Automatic return to the initial test position of the moving plate
  • Overload  protection

Laboratory Medium Fluter "Concora" type FT-07 model

This apparatus flutes the paper samples by means of two fluting rolls. Afterwards, the samples are tested in the crush tester for evaluation of the C.M.T. (Corrugating Medium Test) and C.C.T. (Corrugated Crush Test).

 

According to Standards: UNE 57.074 - ISO 7263 - TAPPI T 809 – DIN 53 143 – SCAN P27 – PAPTAC D29...

Standard Features

 

  • Adjustable pressure range 0-210 N
  • Standard equipment prepared for “A” Flute
  • High stability of temperature with PID controller
  • Precise controlled temperature
  • Programmable temperature with digital display: 177 ºC  ± 2 ºC

Burst Strength Tester BT-10 model

For Determining the Bursting Strength Value of Paper and Corrugated Board “Mullen type”

 

Applicable standards: ISO 2758 / 2759 - SCAN P25/P24 - TAPPI T403 / T807 / 810 - PAPTAC D19P/D8 - BS 3137 - DIN 53141 - AP/AS 1301,403 - ASTM D774

Standard Features

 

  • 15” laptop PC interface - for Data Acquisition and Control
  • LYNX Burst Test Programme
  • Direct Reading in kPa – Kg/cm2 – Bar & PSI
  • Paper: from 0 to 1500 kPa
  • Board: from 200 to 5,000 kPa
  • Statistics: Min/Max, Average and Standard Deviation
  • Operating security system
  • Pneumatic Clamping System
  • Acrylic protection screen (tests area)
  • Improve Your Quality System to ISO 9000
  • Pumping speed: 170 ml / min. (corrugated board) and 95 +/- 5 ml / min. (paper)

Digital Micrometer M5-P3 model (0.001 mm)

For fast and accurate determination of PAPER and CARDBOARD thickness. (Manual Operation)

 

According to Standards: BS DIN EN ISO UNE 534 - PAPTAC D4 - SCAN P7 - TAPPI T 411* (Optional)

Standard Features

 

  • Range: 0 - 10 mm
  • Resolution:  0.001 mm (1 micron)
  • Lowering speed: 2 ± 0.1 mm / s
  • Contact area:  2 cm2
  • Contact pressure: 100 +/- 10 kPa (1 kg/cm2) or 0,5 kg/cm2 (TAPPI)
  • Digital display with reset to “0” function
  • Manual drive by ergonomic handle
  • Compatible with LYNX Test Integral Management System

COBB Sizing Tester CT-05 model

For determining the water absorbance of Paper and Corrugated Board.

 

According to standards: TAPPI T441-ISO 535-NF Q-03-018- NF Q-03-035 -FEFCO 7- DIN 53132- EN 20535 - SCAN P12..

Standard Features

 

  • Standard Test Area - 100 cm2
  • Quick clamping of the sample (by spring)
  • Stainless steel hand roll – 10 Kg
  • Soft rubber gasket
  • All in stainless steel

Internal Bond Tester model IBT

Method to determine of the internal bond strength of single and multi-ply paper and paperboard by dynamics delaminating according TAPPI T569 om-09 – Scott Bond method.

 

Standard Features

 

  • Processor controlled clamping pressure and press time
  • Self calibrating
  • Selective indication of measurements in: J/m2, ft-lb/sq.in. or mJ/sq.in.
  • 4 measuring ranges approx. 52,5 J/m2 to 2100 J/m2 (Scott bond low and high included)
  • Automatic pendulum test according to DIN 51 222
  • Statistic function (AVG – average value, DEV – standard deviation)
  • Measuring range: 4 measuring ranges – 210 J/m² / 525 J/m² / 1050 J/m² / 2100 J/m²
  • Repeatability: < ±2 % (self calibration)
  • Sample dimension: 25.4 mm x 25.4 mm (1.0” x 1.0”)
  • Compatible with LYNX Integral Management System
  • Clamping pressure: max. 1410 kPa (at 6 bar compressed air, 0.1 bar step size)

Friction Testers FT-10 model

For fast and accurate determination of Static and Dynamic Friction coefficient of paper, cardboard, plastic films…

 

Applicable : ASTM D1894 (method B) - TAPPI T816 - TAPPI T549 - ISO 8295

Standard Features

 

  • 15” laptop PC interface - for Data Acquisition and Control
  • LYNX testing software and friction test module
  • Aluminium sample support: 150 x 300 mm
  • Resolution: 0.1 mm
  • Adjustable test speed; range between 1 - 400 mm/min
  • Reading Resolution: 0.005 N (5000 N /100.000 points)
  • 10N Load cell
  • Selectable units in N, Kg or lb
  • Statistics: Min, Max, Average, Standard Deviation, Gauss Bells, Tolerances and Bars
  • Sled dimensions (to be chosen):
  • a) According to ASTM D1894 - Method B: Sled sizes:63,5 x 63,5mm ; sled weight: 200 g
  • b) According to TAPPI T816: Sled sizes: 63,5 x 63,5 mm.; sled weight: 1.360 g

Multitesters MTE-1 & MTE-1L models

To measure tensile breaking strength and elongation Other possible tests (compression - tear - static and dynamic friction ...)

 

Applicable standards: DIN EN ISO UNE 1924-2 DIN EN ISO UNE 1924-3 DIN ISO UNE 3781 DIN ISO UNE 12625-4 SCAN P38 SCAN P67 DIN ISO UNE 12625-5 DIN ISO UNE 15754 FINAT-1-2-3 TAPPI T494 TAPPI T 456 TAPPI T 541 PAPTAC D34

Standard Features

 

  • 15” laptop PC interface - for Data Acquisition and Control
  • LYNX Universal Testing Software LYNX included (*)
  • Force Accuracy: Class 0.5 (± 0.5% accuracy)
  • Stroke Resolution: 0.001 mm
  • Adjustable test speed; range between 0.5 - 1000 mm/min
  • Reading Resolution: 0.01 N
  • Standard load cell of 1000 N
  • Selectable units in N, Kg or lb
  • Statistics: Min, Max, Average, Standard Deviation, Gauss Bells, Tolerances and Bars
  • USB port f/connection to a PC
  • Protection System load cell
  • Programmable Pre-load

Roughness Tester - Bendtsen type

For determining the Smoothness / Roughness of paper and board - Bendtsen method.

 

According to standards: ISO 5636 / 8791/2 – SCAN P21 – DIN 53108 / 53120 – BS 4421…...

Standard Features

 

  • New design of measuring head, more life-long
  • No necessary to use any manostate weights
  • 10 cm2 measuring data
  • Mini air compressor included
  • 3 rotameters tubes with ranges of 0 - 100 ml/min., 50 - 500 ml/min. and 300 - 3000 ml/min.

CONTACT

Dpro Scientific Sdn. Bhd.

B-08-03, Dataran 32,

No. 2 Jalan 19/1, 46300,

Petaling Jaya, Selangor,

Malaysia.

 

Dpro Scientific Pte. Ltd.

80, Genting Lane,

#09-10 Ruby Industrial Complex,

349565 Singapore.

 

Tel      +6(03) 7960 4710

Fax     +6(03) 7960 4711

H/P     +6(012) 2175277

Email  sales@dproscientific.com

DPRO SCIENTIFIC SDN BHD Copyright © 2015